
Digital Control
Keeping safety in mind
Battery Backup
Key Information
- The controller also protects the crop, in case the temperature goes over the maximum setpoint the lights will be automatically dimmed or shut down if necessary. After the dimming event, it is logged so the user can look into the cause.
- The controller is not analog but digitally addresses the fixtures, and this makes sure even the fixtures at the end of the chain run at exactly the same output.
- Designed to set up your Daily Lighting Management
Downloads
Easy Function
Easy Mount
Digital Control
No loss of signal
Simple Installation
One cable type for all DLI fixtures


The DLM-4 Zone controller is the ultimate lighting controller.
The DLM-4 zone controller has all the features to be the perfect lighting controller. The four zones can be programmed entirely independently. Each zone can connect up to 200 lights and a sensor. This means the total amount of lights that can be controlled is 800 with four sensors.
Technical Specifications
DLM-4 Zone Controller
Power | <600W |
Voltage Range | 230V +/= 10% |
IP Rating | IP20 |
Product Dimensions | 208V - 400V |
Product Weight | 0.27kg |
Certifications | CE, ETL |
Warranty | 1 Year |
FAQs
UV Protection
A warning message Displays when UV lights are on.
Is there a sunrise/ sunset setting
Yes